<p>There is a problem with this screen. If you change the game and start it up immediately, there may be residual images from the previous game or screen flickering, which will disappear after running the game for several tens of seconds. Does not affect playing games.</p><p>Playing FC games and F-ZERO games, switching to F-ZERO mode reduces frame rate without leaving any shadows, while switching to this mode is not necessary for other games.</p><p>This is a LCD screen, not a console! If you don&#x27;t have a motherboard, you can&#x27;t assemble it into a console.</p><p>Glass lens with logo</p><p>Please test the LCD before installation. Helps to clarify responsibilities. Each set of LCD has been carefully checked before delivery.</p><p>Since both ends of the 40P cable are 40P, please be careful not to plug them in incorrectly, as it may burn the motherboard.If you need to place touch sensing in another location.</p><p>You can cut the touch cable on the ribbon cable.</p><p>Solder wires to touch sensing points on the circuit board and extend to other locations.</p><p>Short circuit R9 resistance. It can double the brightness of the LCD screen.</p><p>GBASP does not recommend this. Because the voltage supplied by the GBASP motherboard to the LCD screen is too high. This will result in increased power consumption.</p><p>The production of bright shell is more difficult than frosted shell.It is normal for the shell to have some die marks.</p><p></p>