<div class="detailmodule_html"><div class="detail-desc-decorate-richtext"><div> <p id="tl_1">Specifications:<br>Size: 60 x 35 x 12 millimeters/2.36 x 1.38 x 0.47 inches<br>Weight: 20 grams<br>Color: Red/Green/Yellow/Purple<br>Nominal voltage: 12V<br>Nominal current: 10mA<br>Installation method: wireless<br>Corresponding frequency: 433MHz<br>Modulation method: ASK (amplitude keying sideband)<br>Wireless transmission distance: 50-100m (open space)<br>Business scope: Garage doors, alarm systems, automatic doors, rolling shutter doors, etc.<br>Simple multifunctional and multivariable design, customizable, easy to use, and quick to use.<br>This intelligent replication remote control is suitable for electric door remote control, telescopic door remote control, and garage door remote control.<br>Types of cloned chips:<br>2260 (PT2260, SC2260, LX2260, HX2260) 2262, (PT2262, SC2262, LX2262, HS2262, HX2262), PT2264, PT2240 (LX2240), 1527 (EV1527, HS1527, HX1527), FP527, CS5211, SMC918, SMC926, AX5026, AX5326-3, AX5326-4, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F629, PIC16F630<br>Different chip manufacturers have different prefix models, as long as the digital part of the chip can be the same model.<br>Note: We usually do not recommend copying rolling chips because there are many uncertainties when copying rolling chips.When copying a remote control with a rolling code chip, it is impossible to determine whether the original remote control chip is an encryption chip.Therefore, we do not recommend copying the rolling code remote control.<br>Usage stage:<br>1.Clear password: Press and hold the unlock key and lock key simultaneously.The LED light flashes rapidly three times within approximately 2 seconds.Release one finger (the other hand cannot be released), then quickly click the release button three times with the released finger until the LED light flashes rapidly.Both fingers can be released.Next, press any button on the remote control.When the LED light goes out, it indicates that the code has been cleared successfully (all four keys are empty).If the light remains on after pressing any button on the remote control, it indicates that the original code has not been successfully erased.You need to clean again, only after successful cleaning can the code succeed.You can repeatedly clean and clone the code.<br>2.Copy: Remove the original remote control with your left hand and the cloned remote control with your right hand, and try to get as close as possible to both remote controls.Press the first button on both remote controls simultaneously.After about 2 seconds, the LED light will flash rapidly twice.After one second, the indicator light continues to flash and release your finger.After successful learning, press the button again and the indicator light will remain on, which means that the first code of the original remote control has been copied to another remote control.The same method can be used alternately on the second and third buttons.If the copy is successful, the functions of the remote control will be the same as the corresponding original remote control.<br>3.Restoration: When you accidentally delete a copy of the remote control code, you can press both down keys on the remote control copy at the same time.The LED light will flash rapidly.Long press any key and release it, indicating that the remote control code has been restored.Before using our remote control copy, please make sure to remove the existing code from the remote control.<br>How to handle situations where some buttons can be controlled while others cannot?You can use cleaning and recovery operations, as follows:<br>(1) The first clear code;<br>(2) After clearing the code, copy the failed key again without copying any other buttons.<br>(3) Then clear the code again;<br>(4) Recovery code; At this point, the original key that was not successfully copied is now overwritten by the new code, and the initial key that was successfully copied is now retained. If there is no copy after the second copy of the key, please repeat the above steps until all keys are successfully copied.</p> <div>&nbsp;</div> <p></p> </div> <p>&nbsp;</p></div></div>