Introduction: The Nsendato of HDBaseT 4K 60Hz 100M HDMI extender has a maximum extension distance of 100 meters. It adopts HDBaseT HD digital transmission technology. It can extend the 4K 60Hz signal with only one single CAT6a (U/FTP) network cable without compression, and support HDR. The device can extend the HDMI signal, but also supports the extension of bidirectional infrared remote control signal, rs232 signal extension, and Ethernet transmission extension. It is very suitable for large-screen splicing, conference systems, and home entertainment. It has a strong anti-interference ability to ensure the stability of the signal. In the actual engineering, the use of different specifications of the cable, will have an impact on the transmission distance, in order to ensure the stable signal, please choose high-quality cables and standard wiring. Feature: Support HDMI 2.0 Version, HDCP2.2/HDCP1.4; Adopt HDBaseT HD digital transmission technology; Supports uncompressed HDMI 2.0 4K/60/4:4:4/8-bit video transmission, with a main link of 16Gbps and a return link of 2Gbps; Support Ethernet interface 1000Mbps/100Mbps extension; Support bidirectional infrared remote control signal transmit extension; Support RS232 signal extension using through-transmission mode; Use the CAT6a (U/FTP) network cable, 4K/60Hz transmission distance can reach 100 meters; Support HDR. Specifications: The CAT6A (U/FTP) cable between the transmitter and the receiver: up to 100M; The CAT6 (UTP) cable between the transmitter and the receiver: up to 40M; HDMI input: 4K@60Hz/4K@30Hz/1080p/720p/576p/576i/480p/480i; HDMI output: 4K@60Hz/4K@30Hz/1080p/720p/576p/576i/480p/480i; Support audio format: DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/PCM/ATMOS; Max transmission bandwidth: 600MHz; Max baud rate: 3x6Gbps; Input video signal: 0.5~1.5Volts p-p; Output DDP signal: 5Volts p-p (TTL); Max operating current of TX: 400mA; Max operating current of RX: 450mA; Power adapter specification: Input AC (50Hz,60Hz)100V-240V; output: DC12V/1A. Note: In the CAT6A (U/FTP) cable, U/FTP represents the overall outer layer of the network cable without the shielding layer, But each pair of twisted pair is individually wrapped in aluminum foil shielding; in CAT6(UTP) cable, UTP represents an non-shielded twisted-pair. In order to ensure the integrity of the signal transmission, the network cable please don’t to wrap, please straighten it then use. Package: HDMI transmitter; HDMI receiver; IR cable (without battery); Power adapter 12V/1A; User manual