<div class="detailmodule_html"><div class="detail-desc-decorate-richtext"><p>Product Features<br/>1. Automatic lighting, no need for manual control. When someone enters the sensing range, the person does not leave and remains active. The switch continues to conduct, and after the person leaves, the switch delays and automatically turns off the load.<br/>2. Compatible with various loads, incandescent lamps ≤ 1200W/energy-saving lamps ≤ 600W/fluorescent lamps ≤ 600W/LED lamps ≤ 150W/ceiling lamps ≤ 200W/exhaust fans ≤ 200W.<br/>3. High power relay with direct control of load, long lifespan and high compatibility. High frequency step-down circuit, stable current, low power consumption, no flicker or slight brightness.<br/>4. This product can be used for anti-theft alarm. It can be installed in a restricted area, and as long as someone enters the restricted area, the alarm bell will automatically sound.<br/>5. Wide range of applications: Suitable for automatic exhaust of beds, corridors, hallways, bathrooms, basements, warehouses, and other places, as well as automatic control of lighting functions for exhaust fans and other electrical appliances.<br/>Product parameters<br/>Product model: TDL-2086<br/>Working voltage: AC220V<br/>Static current:&lt;3mA<br/>Delay time: 30 seconds<br/>Light control: 10-15LUX<br/>Working temperature: -10 ° C~+35 ° C<br/>Induction method: Passive infrared induction<br/>Sensing angle: 120 °<br/>Sensing distance: 3-5m<br/>IP rating: IP54<br/>Trigger mode: continuous triggering<br/>Size: 67 * 53 * 48mm<br/>Load power: incandescent lamp ≤ 1200W/energy-saving lamp ≤ 600W/fluorescent lamp ≤ 600W/LED lamp ≤ 150W/ceiling lamp ≤ 200W/exhaust fan ≤ 200W<br/>Usage scenarios with light control: suitable for places such as under beds, corridors, hallways, bathrooms, basements, warehouses, etc. (no sensing during the day, only sensing at night)<br/>Usage scenarios without light control: electric fans at elevator entrances in supermarkets and shopping malls, controlling lighting fixtures (all day sensing)<br/>precautions<br/>1. Please install according to the wiring diagram. After checking for accuracy, the light will turn on when the power is turned on, indicating that the induction switch is in normal working condition. The first power on requires 10-20 seconds of preheating before the product can enter the measurement and control state.<br/>2. The detection effect may be affected by environmental and other factors, such as room temperature, walking speed, etc.<br/>3. To avoid reducing product sensitivity, please do not install the product in areas with ventilation openings, heat sources, air conditioning vents, hot and cold air flow, or direct sunlight.<br/>4. This switch circuit design has a repeated triggering memory function, which means that as long as someone is active in the detection area, the switch will be continuously triggered and the delay time will be calculated again. Therefore, the delay time should be calculated from the last trigger before the human body leaves the detection area.<br/>Shipping List<br/>Human body sensing switch * 1<br/>Chinese and English instruction manual * 1<br/>Adhesive backing * 1<br/>Screw * 1<br/><br/></p></div></div><p><br/></p>