<div class="detailmodule_text"><p class="detail-desc-decorate-title" style="text-overflow: ellipsis;font-family: 'OpenSans';color:'#000';word-wrap: break-word;white-space: pre-wrap;font-weight: 900;font-size: 20px;line-height: 28px;color: #000;margin-bottom: 12px;"></p><p class="detail-desc-decorate-content" style="text-overflow: ellipsis;font-family: 'OpenSans';color:'#000';word-wrap: break-word;white-space: pre-wrap;font-weight: 300;font-size: 14px;line-height: 20px;color: #000;margin-bottom: 12px;">High quality brand new.<br>Start mode: medium, soft, strong<br>Color: red and white<br>Size: 60 * 50 * 8mm <br>Weight: 30g Program card Appearance description<br>1: Low voltage cut-off: This function is mainly to prevent the lithium battery pack from<br>over discharging. When using the lithium battery pack, please set the appropriate<br>Warning: Never use the default value "Non-protected" for Li-ion battery pack.<br>Warning: Never use the default value "Non-protected" for Li-ion battery! 3.1V, 2.9V, 2.7V, Non-protected<br>(default value 3.1V).<br>2: 3 start-up modes (also called "punch"), from "soft" to "very aggressive" (default value Medium)<br>(Medium).<br>3: Maximum brake force. (25A, 45A, 60A) 50%, 25%, 75%, 100　% (default 50%).<br>(80A, 120A) 25%, 50%, 75%, 100　% (default value 25%).<br>4: Maximum reverse force: 25%, 50%, 75%, 100　% (default 25%)<br>5: Neutral range: 9% (narrow), 6% (normal), 12% (wide) (default value 9%)<br><br>Programmer operation instructions.<br>a) Connect the BEC cable of the ESC to the programmer, the connection direction is according to the color direction shown above (black ground wire against the right frame).<br>b) Connect the ESC power supply and turn on the power switch (80A and 120A should be pressed and held by the ESC button).<br>c) When the programming green LED on the programmer blinks twice and then lights up, it means the ESC and programmer are connected successfully. When the programming LED is off for the second time, it means the programmer will read out the current programming parameters of the ESC and show the corresponding LED in the corresponding item. Otherwise, the connection fails.<br>d) Press the down button on the programmer to select among different programming items, the corresponding LEDs of the selected current item will light up in sequence, indicating the currently selected item.<br>e) Press the right button on the programmer to select the currently selected item and the LED will light up for the selected item.<br>f) Repeat d and e to select all the items to be set.<br>g) Press the programming button on the programmer to program the above settings into the ESC. The programming LED lights up when programming starts and goes off after more than 5S to indicate successful programming. Otherwise, the programming fails (turn off the power and start programming again).<br>h) Press the factory button on the programmer to restore the ESC to the factory default settings. The programming LED lights up when programming starts and goes off after more than 5S to indicate successful programming. Otherwise, the programming fails (turn off the power and start programming again).<br><br>Package includes: 1 * programming card<br><br>Note.<br>Please allow slight size difference due to different manual measurement.<br>Due to differences in monitors and lighting effects, the actual color of the item may be slightly different from the color shown on the picture. Thank you for your support!</p></div> <div class="detailmodule_image"></div>