R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness
R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness

R53D 10W 10Ohm LED Headlight Load Resistor Flicker Decoders Warning Canceler Harness

<div class="detailmodule_html"><div class="detail-desc-decorate-richtext"><div style="font-size: 18px;">Description:<br><span style="background: white; color: #fff;">OOTDTY</span> &nbsp;<br>brand new and high quality<br>Feature:<br>Main function: When refitting the LED of some motorcycles, because the power of the halogen lamp of car is different from the power of the LED lamp after the modification, the motorcycle will check out the power mismatch, so there is a failure, no flash or It is necessary to install an LED to remove the fault light alarm and other problems caused by the modification of the LED light.<br>Main purpose: some vehicles will change the LED lights after installation, the steering lights will flash quickly, or do not flash. The newly installed LED lights will report errors and other phenomena. The addition of this product can solve the flashing of the steering lights and remove the light fault alarm. Motorcycles are suitable.<br>Installation instructions: The left and right lines of the turn signals are different. If you change the LED lights on the left and right, install on each side. If you change the lights on the left and right, you can only install two, but the left and right turn lights (use (A resistor) and the front right and rear right turn signals (use a resistor) must be connected to the resistor with a wire. For ease of installation, it is recommended to install a resistor for each turn<br>LED Resistor only, other accessories in the picture are not included.<br><br><b>Specifications:</b><br><br>Item Type: LED Resistor<br>Material: electronic components<br>Size: 2.8x1.5cm/1.1x0.5in, cable length: 15cm/5.9in<br>Color: Black+Red<br>Power: 10W<br>Resistance: 10Ω<br>Quantity: 1 Set(4pcs)<br><br><b>Note:</b><br><br>1cm=10mm=0.39inch<br>Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.<br>Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!<br><br><b>Package Includes:</b><br><br>4 x LED Resistor<br><br><br><br><br><br><br><br><br> </div></div></div>
$15.065
$15.065

Colors

Sizes

-
+
<div class="detailmodule_html"><div class="detail-desc-decorate-richtext"><div style="font-size: 18px;">Description:<br><span style="background: white; color: #fff;">OOTDTY</span> &nbsp;<br>brand new and high quality<br>Feature:<br>Main function: When refitting the LED of some motorcycles, because the power of the halogen lamp of car is different from the power of the LED lamp after the modification, the motorcycle will check out the power mismatch, so there is a failure, no flash or It is necessary to install an LED to remove the fault light alarm and other problems caused by the modification of the LED light.<br>Main purpose: some vehicles will change the LED lights after installation, the steering lights will flash quickly, or do not flash. The newly installed LED lights will report errors and other phenomena. The addition of this product can solve the flashing of the steering lights and remove the light fault alarm. Motorcycles are suitable.<br>Installation instructions: The left and right lines of the turn signals are different. If you change the LED lights on the left and right, install on each side. If you change the lights on the left and right, you can only install two, but the left and right turn lights (use (A resistor) and the front right and rear right turn signals (use a resistor) must be connected to the resistor with a wire. For ease of installation, it is recommended to install a resistor for each turn<br>LED Resistor only, other accessories in the picture are not included.<br><br><b>Specifications:</b><br><br>Item Type: LED Resistor<br>Material: electronic components<br>Size: 2.8x1.5cm/1.1x0.5in, cable length: 15cm/5.9in<br>Color: Black+Red<br>Power: 10W<br>Resistance: 10Ω<br>Quantity: 1 Set(4pcs)<br><br><b>Note:</b><br><br>1cm=10mm=0.39inch<br>Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid.<br>Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!<br><br><b>Package Includes:</b><br><br>4 x LED Resistor<br><br><br><br><br><br><br><br><br> </div></div></div>

Related Product

Browse The Collection of Top Products.

Bumper Fog Light for BMW E46 3 Series 2001-2005 M3 1999-2002 E39 M5 Left

$29.795 $56.135