Stainless Steel High Pressure Air Plunger for Sink Toilet Drain

Blogs

1.Ease of Use and Powerful Pump: Simply compress the air and pull the trigger to harness the power of high-pressure compressed air. This powerful toilet plunger can quickly blow away even the toughest blockages in the drain, clearing the blockage within seconds. It is much faster than traditional plungers and snake cleaners, saving you valuable time 2.Quick and Easy Unclogging: From sinks to shower drains, tubs to toilets, this tool has the attachments to get the job done! The toilet plunger can generate high-pressure air power and effectively deal with various blockages caused by hair, cloth, tea, leaves, grease, oil, and more. The sink plunger is a quick and easy way to clear clogged drains. It's a must-have for every household! High-Quality Material: The body is made of stainless steel, which is waterproof and rust-proof. The toilet plunger uses thickened natural rubber to create a tight seal when in use, preventing any air pressure leaks. It has a built-in barometer to help you keep track of pressure, and an easy-release trigger to stop the pressure. The high-quality materials ensure the durability of the toilet plunger, which can be reused for years Increasing Air Pressure and Usage Tips: For achieving the desired PSI, follow these steps: 1.Install the inflating base; 2. Quickly pump to the desired pressure value. 3. Continue pumping until the desired pressure is reached. 4.Fully press the plunger head into the toilet drain and exert steady pressure. 5. Ensure that the water level is 5 cm above the rubber head. For splash-proof results, cover the toilet bowl with a plastic protective cover or towel If it is difficult to pressurize, please pay attention to the following three points: 1.If the air pressure can't be maintained and there's leakage in the middle, it's possible that the upper and lower rotating interface isn't properly installed. 2.After installation, if it's difficult to inflate and the air pressure can't reach 2-3, it's likely that the air bubble in the middle wasn't removed before installation. 3.After pressurization, no impact when pressing the switch and no air pressure comes out, it's because the air bubbles weren't removed and the air pressure entered the stainless steel storage tube.